Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
The Truck Mount Store open 24 Hours 7 days a week

Categories

Categories

Kohler 7hp Command Pro Horizontal Shaft Single Cylinder Engine PA-CH270-0015 International Basic [CH270-0015]

$579.88

Kohler 7hp Command Pro Horizontal Shaft Single Cylinder Engine PA-CH270-0015 International Basic [CH270-0015]

$579.88
Quantity:
Share

Product Description

kohler 7hp command pro horizontal shaft single cylinder ch270 engine

Standard Features:
• Overhead Valve Design
• Electronic Ignition
• Quad-CleanTM 4-Stage All-Season Heavy Duty Cyclonic Air Cleaner (Unless otherwise mentioned)
• Dual Oil Fill Locations and Oil Drains
• Cast Iron Cylinder Liner
• 4.1 L Metal Tank w/Strainer
• Fuel Shut-off Valve (Unless otherwise mentioned)
• Stellite® Exhaust Valve
• Engine Mounted Throttle and Choke Controls, Remote
Throttle Ready
• Oil SentryTM Switch Installed (No Light)
• Dual Ball Bearings, PTO and Flywheel
• Metal Blower Housing
• Indexable Recoil Starter • PTO Face • For engines with SAE crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) 5/16-24 UNF-2B x 15 deep • For engines with Metric crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) M8x1.25-6H x 15 deep • Large Capacity Muffler w/Heat Shield and Spark Arrestor • Multi-language Owner’s • Color - Black with Cast Aluminum • Important Compliance Information: 
1.Specs containing -3XXX are CARB Tier III, EPA Phase 3 and RFI compliant (Can be sold globally) 
2.Specs containing -0XXX are EU Stage 2 and RFI compliant (For sale in EU, Australia and New Zealand) 
3.Specs containing -1XXX do not meet any compliance. These engine cannot be sold in US, Canada, EU, Australia and New Zealand (For sale in rest of the world)

Standard Features Plus:
• Crankshaft - 5/8” Diameter x 2.44” PTO Length, Threaded Pump Shaft
• Variable Speed

User-Friendly.

Interference free PTO face provides flexibility to power any application without modification to the equipment. Dual oil fills and drains and easy access throttle, choke and shutoff make operating and maintaining this engine a breeze.

Durable, Long Life Design.

Features steel-forged crankshaft, cast iron cylinder bore, tough Stellite® faced exhaust valve with Tuftride® coated stems and dual ball bearings for maximum side load characteristics. Also, the Quad-Clean™ four-stage cyclonic air filtration system ensures only the cleanest air is entering the engine, maximizing engine power and life.

Increased Efficiency.

The KOHLER advanced ignition system reduces fuel consumption , while the large capacity fuel tank allows for longer runs between fill-ups. Combined, these two features will save you time and money.
 

User-Friendly Maintenance.

  • Interference free PTO face
  • Dual oil fills and drains
  • No tools required all season air cleaner
  • Easy access throttle, choke and shutoff
  • Oil Sentry™ automatic low oil engine shutdown system
  • Carburetor bowl drain

High Power Performance.

  • Overhead valve design
  • Increased displacements
  • High-inertia flywheel

Extended Run Times.

  • Large metal fuel tank and chrome plated cap
  • Swirl induction combustion chamber

Quiet, Smooth Operation.

  • Oversized muffler with heat shield
  • Mechanical governor
  • Sound-deadening alloy crankcase
  • Silenced air intake

Easy Dependable Starts.

  • Electronic ignition system
  • Automatic compression release
  • Dual ball bearings
  • Indexable, easy pull recoil starter

Reliability and Long Life Design.

  • Quad-Clean™ heavy-duty cyclonic air cleaner
  • Warm air intake system for cold weather operation
  • Cast iron cylinder bore
  • Steel-forged crankshaft
  • Stellite-faced exhaust valve
  • Water trap to separate moisture in fuel
  • 3 fuel filters: fill neck, in tank, and carburetor inlet
  • 3 year commercial warranty

Engine Type:

4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block

Model
Command PRO CH270
Max Power @3600 RPM hp (kW) 1 7 (5.2)
Displacement cu in (cc) 12.7 (208)
Bore in (mm) 2.8 (70)
Stroke in (mm) 2.1 (54)
Max Torque lbs. ft (Nm)1 9.2 (12.4)
Compression Ratio 8.5:1
Dry Weight lbs (kg) 38.7 (17.5)
Oil Capacity U.S. quarts (L) 0.63 (0.6)
Lubrication Splash
Dimensions L x W x H in 12.7 x 15.2 x 14.2
Backpressure Limit 2 30
J1995 Power hp (kW) 3 6.1 (4.6)
J1995 Torque lbs ft (Nm) 3 9.7 (13.1)
* Measurements are based on a recoil-start engine.
1 Max Power (hp) and Max Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

Product Reviews