This 3500 psi rated Axis Point Heat Exchanger can be installed on any small engine compatible with a 1 inch, 1.25 inch,1.5 inch and a 2 inch Header and up.

Exhaust Inlet can be made as D Style (Right on the End) or H side coming in form the side about 2.5 inches from the front edge.  

***Special Note*** The Water Connections are always on the Exhaust Inlet side of the Heat Exchanger.

 We at Blue Baron, also build one of the most Finest Tig Welded Stainless Solid Headers in the Industry.

 So, if your need for a Super High Quality Exhaust Manifold, you have come to the right place.

 https://www.truckmountstore.com/kohler-exhaust-headers/

 Stainless Body Housing Dimensions: 18 inches X 8 inches

Mounting Flat Bar Brackets are 3/16 thick Stainless with 3/8 inch Hole (Optional Open Slotted 3/8)

Spacing of the Front to Back Mounting Brackets can be changed to what every spacing requirements exist for the Customer's Machine Mounting Base Plate.

Manufacturers Warranty (1 year) 

It is always good to start with a larger opening, which enables you to utilize to multiple of different size engines and Exhaust Headers.

We at Blue Baron, also build one of the most Finest Tig Welded Stainless Solid Headers in the Industry.

So, if your need for a Super High Quality Exhaust Manifold, you have come to the right place.

     Click (Here) or on Picture